ABB ACS850-04 series, Hardware Manual

Page: 135 / 164

Technical data
135
Materials
Drive enclosure • PC/ABS 2.5 mm, color NCS 1502-Y (RAL 9002 / PMS 420 C)
• hot-dip zinc coated steel sheet 1.5 to 2.5 mm, thickness of coating 100 micrometers,
color NCS 1502-Y
Package Plywood and cardboard, bands PP.
Disposal The main parts of the drive can be recycled to preserve natural resources and energy.
Product parts and materials should be dismantled and separated.
Generally all metals, such as steel, aluminum, copper and its alloys, and precious metals
can be recycled as material. Plastics, rubber, cardboard and other packaging material can
be used in energy recovery. Printed circuit boards and DC capacitors (C1-1 to C1-x) need
selective treatment according to IEC 62635 guidelines. To aid recycling, plastic parts are
marked with an appropriate identification code.
Please contact your local ABB distributor for further information on environmental aspects
and recycling instructions for professional recyclers. End of life treatment must follow
international and local regulations.
Applicable standards
The drive complies with the following standards.
EN 61800-5-1:2007 Adjustable speed electrical power drive systems. Part 5-1: Safety requirements –
electrical, thermal and energy
EN 60204-1:2006 Safety of machinery. Electrical equipment of machines. Part 1: General requirements .
Provisions for compliance: The final assembler of the machine is responsible for installing
- emergency-stop device
- supply disconnecting device
- IP00 drive module into a cabinet.
EN 60529:1992 (IEC 60529) Degrees of protection provided by enclosures (IP code)
IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems. Part 1: Principles,
requirements and tests.
EN 61800-3:2004 Adjustable speed electrical power drive systems. Part 3: EMC requirements and specific
test methods
EN 61800-5-2:2007 Adjustable speed electrical power drive systems. Part 5-2: Safety requirements –
Functional
UL 508C (2002) UL Standard for Safety, Power Conversion Equipment, third edition
CSA C22.2 No. 14-10 Industrial control equipment
GOST R 51321-1:2007 Low-voltage switchgear and control gear assemblies. Part 1 – Requirements for type-
tested and partially type-tested assemblies – General technical requirements and
methods of tests