ABB ACS580-07, Hardware Manual

Page: 65 / 288

This table shows the requirements when an ABB motor is in use.
Requirement for Nominal AC supply
voltage
Motor
type
ABB du/dt and common mode filters, insulated N-end
motor bearings
Motor insula-
tion system
P
N
≥ 350 kW
or
frame size ≥ IEC 400
100 kW ≤ P
N
< 350
kW
or
IEC 315 ≤ frame size
< IEC 400
P
N
< 100 kW
and frame
size <
IEC 315
P
N
≥ 469 hp
or
frame size >
NEMA 580
134 hp ≤ P
N
< 469 hp
or
NEMA 500 ≤ frame
size ≤ NEMA 580
P
N
< 134 hp
and frame
size <
NEMA 500
+ N + CMF + N - Standard U
N
≤ 500 V Random-
wound
M2_, M3_
and M4_
+ N + d u /d t + CMF + N + d u /d t + d u /d t Standard 500 V < U
N
≤ 600 V
or
+ N + CMF + N - Reinforced
+ N + d u /d t + CMF + N + d u /d t + d u /d t Reinforced 600 V < U
N
≤ 690 V
(cable length ≤
150 m)
+ N + CMF + N - Reinforced 600 V < U
N
≤ 690 V
(cable length >
150 m)
P
N
< 500 kW:
+N + CMF
+ N + CMF n.a. Standard 380 V < U
N
≤ 690 V Form-
wound
HX_ and
AM_
P
N
≥ 500 kW:
+N + d u /d t + CMF
+ N + d u /d t with voltages over 500 V + CMF Check with the
motor manu-
facturer. 380 V < U
N
≤ 690 V
Old
1)
form-
wound
HX_ and
modular
+ N + CMF Enamelled
wire with fiber
glass taping 0 V < U
N
≤ 500 V
Random-
wound
HX_ and
AM_
2)
+ N + d u /d t + CMF 500 V < U
N
≤ 690 V
Consult the motor manufacturer. HDP
1) manufactured before 1.1.1998
2) For motors manufactured before 1.1.1998, check for additional instructions with the motor manufacturer.
Guidelines for planning the electrical installation 65
11