ABB ACS580-07, Hardware Manual

Page: 213 / 288

Ambient conditions
Environmental limits for the drive are given below. The drive is to be used in a heated,
indoor, controlled environment.
Transportation Storage Operation
in the protective package in the protective package installed for stationary use
- - 0 to 2000 m (6561 ft)
above sea level. For alti-
tudes over 2000 m, con-
tact ABB. Installation site altitude
Output derated above
1000 m (3281 ft). See
section
Output derating
-40 to +70 °C (-40 to +158
°F) -40 to +70 °C (-40 to +158
°F) -0 to +50 °C (32 to 122
°F). No condensation al-
lowed. Output derated in
the range +40 … +50 °C
(+104 … +122 °F). See
section
Output derating
Air temperature
Max. 95% Max. 95% 5 to 95% Relative humidity
No condensation allowed. Maximum allowed relative humidity is 60% in the pres-
ence of corrosive gases.
IEC 60721-3-2:1997 IEC 60721-3-1:1997 IEC/EN 60721-3-3:2002 Contamination
(IEC 60721-3-x)
Class 2C2 Class 1C2 Class 3C2 Chemical gases
Class 2S2 Class 1S3. (packing must
support this, otherwise
1S2) Class 3S2. No conductive
dust allowed. Solid particles
60 to 106 kPa 0.6 to 1.05
atmospheres 70 to 106 kPa 0.7 to 1.05
atmospheres 70 to 106 kPa 0.7 to 1.05
atmospheres Atmospheric pressure
IEC/EN 60721-3-2:1997 IEC/EN 60721-3-1:1997 IEC/EN 60721-3-3:2002 Vibration
2…9 Hz: max. 3.5 mm
amplitude 9…20 Hz: 10
m/s2 (32.8 ft/s2) 10…57 Hz: max. 0.075
mm amplitude 57…150
Hz: 1 g 10…57 Hz: max. 0.075
mm amplitude 57…150
Hz: 1 g IEC 61800-5-1
IEC 60068-2-6:2007,
EN 60068-2-6:2008
Environmental testing Part
2: Tests –Test Fc: Vibra-
tion (sinusoidal)
With packing max. 100
m/s2 (330 ft./s2), 11 ms With packing max. 100
m/s2 (330 ft./s2), 11 ms Not allowed Shock
IEC 60068-2-27:2008,
EN 60068-2-27:2009
Environmental testing -
Part 2-27: Tests - Test Ea
and guidance: Shock
Auxiliary circuit power consumption
100 W Cabinet heater (option
+G300)
Technical data 213