Type designation label
The type designation label includes an IEC rating, appropriate markings, a type designation
and a serial number, which allow identification of each unit. The type designation label is
located on the front cover. An example label is shown below.
1
2
3
4
6
8
9
7
5
Type designation, see section
below.
1
Manufacturing address
2
Frame size
3
Cooling method
4
Degree of protection
5
Ratings, see section
Electrical power network specification (page 211)
and
6
Short-circuit withstand strength, see section
Electrical power network specification (page 211)
7
Valid markings
8
Serial number. The first digit of the serial number refers to the manufacturing plant. The next four digits
refer to the unit’s manufacturing year and week, respectively. The remaining digits complete the serial
number so that there are no two units with the same number.
9
Type designation key
The type designation contains information on the specifications and configuration of the
drive. The first digits from left express the basic configuration (eg, ACS580-07-0640A-4).
The optional selections are given thereafter, separated by plus signs, eg, +B055. The main
selections are described below. Not all selections are available for all types or with all options.
For more information, refer to
ACX580-07 Ordering Information
(3AXD10000485076 available
on request).
Description
Code
Basic codes
Product series
ACS580
When no options are selected: cabinet-installed drive, IP21, main switch, AC fuses, ACS-AP-S as-
sistant control panel, for frames R6 to R9 EMC filtering for first environment TN grounded systems
(category C2), for frames R10 and R11 EMC filtering for second environment TN grounded systems
(category C3), input choke, common mode filter in frames R10 and R11, coated boards, ACS580
standard control program, EIA/RS-485 fieldbus connector, Safe torque off function, bottom entry
and exit of cables, multilingual device label sticker, USB memory stick containing all manuals.
07
Size
Refer to the rating tables,
xxxx
Operation principle and hardware description 47
Summary of Contents for ACS580-07
