ABB ACS580-07, Hardware Manual

Page: 180 / 288

Free space for door opening:
R6, R7: 400 mm (15.75”) in)
R8, R9: 500 mm (19.68 in)
R10. R11: 800 mm (31.50 in)
Maximum allowed plinth height for the
extraction/installation ramp
The maximum plinth height for the extraction/installation ramp delivered with the drive is 50
mm (1.97 in).
Typical power cable sizes
The table below gives typical copper and aluminum cable types with concentric copper
shield for the drives with nominal current. For the cable sizes accepted by the drive cabinet
cable entries and connection terminals, see
Terminal and entry data for the power
cables (page 182) .
US
2)
IEC
1)
Frame
size
Drive type ACS580-07-
Cu cable type Al cable type Cu cable type
AWG/kcmil per phase mm
2
mm
2
U
N
= 400 V
3/0 3×120 3×95 R6 0145A-4
250 MCM 3×150 3×120 R7 0169A-4
300 MCM 3×240 3×150 R7 0206A-4
2×2/0 2×(3×95) 2×(3×70) R8 0246A-4
2×3/0 2×(3×120) 2×(3×95) R8 0293A-4
2×250 MCM 2×(3×185) 2×(3×120) R9 0363A-4
2×300 MCM 2×(3×240) 2×(3×150) R9 0430A-4
2×500 MCM or 3×250
MCM
3x(3x150) 3x(3x95) R10 0505A-4
3x300 MCM 4×(3x150) 3x(3x120) R10 0585A-4
3x300 MCM 4×(3x150) 3x(3x150) R10 0650A-4
3×500 MCM or 4×300
MCM
4x(3x185) 3x(3x185) R11 0725A-4
3×600 MCM or 4×400
MCM
4x(3x240) 3x(3x240) R11 0820A-4
3×600 MCM or 4×400
MCM
4x(3x240) 3x(3x240) R11 0880A-4
U
N
= 480 V
3/0 3x120 3x95 R6 0124A-4
180 Technical data