background image

Safety Instructions

4

ACS 600 MultiDrive

Starting TSU or DSU

Note the warning below before starting drives equipped with a Thyristor 
or Diode Supply Section.

WARNING!

 Before power switch-on, make sure that a sufficient 

inverter power is connected to the intermediate circuit. Rules of thumb:

1. The sum power of the inverters connected must be at least 30% of 

the sum power of all inverters.

2. The sum power of the inverters connected must be at least 30% of 

the rated power of the braking section (

P

br.max

) if present.

If the above mentioned rules are not followed, the DC fuses of the 
connected inverter(s) may blow or the braking chopper (if used) may 
be damaged. 

The phenomena which result in a fuse blow are as follows:

At start, a charging current high enough for charging all the 
inverters flows to the connected ones.

In Thyristor Supply Sections, the DC voltage may overshoot the 
controller bridge change limit, causing an immediate change to 
regeneration and a high reverse current.

The DC voltage may overshoot the braking chopper controller 
voltage limit, causing an immediate switching into braking mode 
and a high braking current, which in turn discharges low power 
inverter capacitors. 

The braking chopper may be damaged by repeated on-off switching of 
the braking due to a high supply and braking section power compared 
to the inverter power.

Summary of Contents for ACS 600 MultiDrive







































































Reviews: