Supplemental Installation Manual for ACS580-0P
39
ACS580-0P with Bypass
Dimensions and weights
ACS580-0P, packaged drive with circuit breaker disconnect and two-contactor
bypass, UL (NEMA) Type 1
Dimension
Reference
Height (H1)
Height (H1)
Width (W1)
Width (W2)
Depth (D)
Weight
in
mm
in
mm
in
mm
in
mm
in
mm
lb
kg
CX1-21
36.00 914
35.50 902
13.70 348
8.00
203
13.32 338
90
41
CX1-22
53.44 1357
52.44 1332
16.30 414
10.00 254
14.35 364
175
80
CX1-23
61.87 1571
60.88 1546
19.31 490
10.00 254
18.98 482
375
170
CX1-24
73.44 1865
61.38 1559
34.75 883
26.00 660
20.40 518
550
250
CX1-25
84.00 2134
n/a
n/a
36
914
n/a
n/a
23.3
592
950
432
H1 - Height
H2 - Mounting Height
W1 - Width
W2 - Mounting Width
CAUTION
ATTENTION
VOLTAGE MAY BE PRESENT FROM MORE
THAN ONE SOURCE AND SHOULD BE
DISCONNECTED FOR SERVICING.
PEUT ETRE SOUS TENSION DE PLUS D'UNE
SOURCE D'ALIMENT ELECTRIQUE. COUPER TOUTES LES
SOURCES D'ALIMENTATION AVANT LE DEPANNAGE.
RISK OF FIRE OR ELECTRIC SHOCK-
The opening of the branch-circuit protective device may
be and indication that a fault current has been
interrupted. All current-carrying parts and other
components protected by this device should be
examined and replaced if damaged. If burnout of a
current element of an overload relay occurs, the
complete overload relay must be replaced.
WARNING
Wait at least 5 minutes after disconnecting
supply before continuing to work.
Consult the Installation & Start-Up Manual
before working on the frequency converter.
WARNING
!
ATTENTION!
!
Attendre au moins 5 min apres sectionnement
de l'alimntation pour travailler sur l'appareil.
Consulter le Manuel d'installation et de mise
end route avant d'intervenir sur le convertisseur
de frequence.
DRIVE
BYPASS
OFF
W1
W2
D
H2
H1
CAUTION
ATTENTION
VOLTAGE MAY BE PRESENT FROM MORE
THAN ONE SOURCE AND SHOULD BE
DISCONNECTED FOR SERVICING.
PEUT ETRE SOUS TENSION DE PLUS D'UNE
SOURCE D'ALIMENT ELECTRIQUE. COUPER TOUTES LES
SOURCES D'ALIMENTATION AVANT LE DEPANNAGE.
RISK OF FIRE OR ELECTRIC SHOCK-
The opening of the branch-circuit protective device may
be and indication that a fault current has been
interrupted. All current-carrying parts and other
components protected by this device should be
examined and replaced if damaged. If burnout of a
current element of an overload relay occurs, the
complete overload relay must be replaced.
WARNING
Wait at least 5 minutes after disconnecting
supply before continuing to work.
Consult the Installation & Start-Up Manual
before working on the frequency converter.
WARNING
!
ATTENTION!
!
Attendre au moins 5 min apres sectionnement
de l'alimntation pour travailler sur l'appareil.
Consulter le Manuel d'installation et de mise
end route avant d'intervenir sur le convertisseur
de frequence.
DRIVE
BYPASS
OFF
W
D
H
CAUTION
ATTENTION
VOLTAGE MAY BE PRESENT FROM MORE
THAN ONE SOURCE AND SHOULD BE
DISCONNECTED FOR SERVICING.
PEUT ETRE SOUS TENSION DE PLUS D'UNE
SOURCE D'ALIMENT ELECTRIQUE. COUPER TOUTES LES
SOURCES D'ALIMENTATION AVANT LE DEPANNAGE.
RISK OF FIRE OR ELECTRIC SHOCK-
The opening of the branch-circuit protective device may
be and indication that a fault current has been
interrupted. All current-carrying parts and other
components protected by this device should be
examined and replaced if damaged. If burnout of a
current element of an overload relay occurs, the
complete overload relay must be replaced.
WARNING
Wait at least 5 minutes after disconnecting
supply before continuing to work.
Consult the Installation & Start-Up Manual
before working on the frequency converter.
WARNING
!
ATTENTION!
!
Attendre au moins 5 min apres sectionnement
de l'alimntation pour travailler sur l'appareil.
Consulter le Manuel d'installation et de mise
end route avant d'intervenir sur le convertisseur
de frequence.
DRIVE
BYPASS
OFF
W1
W2
D
H2
H1
Summary of Contents for ACS 580-OP
Page 2: ......