Supplemental Installation Manual for ACS580-0P
41
ACS580-0P with Bypass
ACS580-0P, packaged drive with circuit breaker disconnect and two-contactor
bypass, UL (NEMA) Type 3R
Dimension
Reference
Height (H1)
Height (H1)
Width (W1)
Width (W2)
Depth (D)
Weight
in
mm
in
mm
in
mm
in
mm
in
mm
lb
kg
CX3R-21
27.34 694
22.50 572
18.21 463
16.50 419
14.38 365
90
41
CX3R-22
33.00 838
28.50 724
24.00 610
22.50 572
14.37 365
145
66
CX3R-23
39.40 1001
34.50 876
30.00 762
28.50 724
15.87 403
230
105
CX3R-24
51.00 1295
46.50 1181
36.00 914
34.50 876
20.37 517
445
202
CX3R-25
72.00 1829
58.60 1488
42.00 1067
34.50 876
25.10 638
675
307
H1 - Height
H2 - Mounting Height
W1 - Width
W2 - Mounting Width
CAUTION
ATTENTION
VOLTAGE MAY BE PRESENT FROM MORE
THAN ONE SOURCE AND SHOULD BE
DISCONNECTED FOR SERVICING.
PEUT ETRE SOUS TENSION DE PLUS D'UNE
SOURCE D'ALIMENT ELECTRIQUE. COUPER TOUTES LES
SOURCES D'ALIMENTATION AVANT LE DEPANNAGE.
RISK OF FIRE OR ELECTRIC SHOCK-
The opening of the branch-circuit protective device may
be and indication that a fault current has been
interrupted. All current-carrying parts and other
components protected by this device should be
examined and replaced if damaged. If burnout of a
current element of an overload relay occurs, the
complete overload relay must be replaced.
WARNING
Wait at least 5 minutes after disconnecting
supply before continuing to work.
Consult the Installation & Start-Up Manual
before working on the frequency converter.
WARNING
!
ATTENTION!
!
Attendre au moins 5 min apres sectionnement
de l'alimntation pour travailler sur l'appareil.
Consulter le Manuel d'installation et de mise
end route avant d'intervenir sur le convertisseur
de frequence.
DRIVE
BYPASS
OFF
W1
W2
D
H2
H1
DRIVE
BYPASS
OFF
CAUTION
ATTENTION
VOLTAGE MAY BE PRESENT FROM MORE
THAN ONE SOURCE AND SHOULD BE
DISCONNECTED FOR SERVICING.
PEUT ETRE SOUS TENSION DE PLUS D'UNE
SOURCE D'ALIMENT ELECTRIQUE. COUPER TOUTES LES
SOURCES D'ALIMENTATION AVANT LE DEPANNAGE.
RISK OF FIRE OR ELECTRIC SHOCK-
The opening of the branch-circuit protective device may
be and indication that a fault current has been
interrupted. All current-carrying parts and other
components protected by this device should be
examined and replaced if damaged. If burnout of a
current element of an overload relay occurs, the
complete overload relay must be replaced.
WARNING
Wait at least 5 minutes after disconnecting
supply before continuing to work.
Consult the Installation & Start-Up Manual
before working on the frequency converter.
WARNING
!
ATTENTION!
!
Attendre au moins 5 min apres sectionnement
de l'alimntation pour travailler sur l'appareil.
Consulter le Manuel d'installation et de mise
end route avant d'intervenir sur le convertisseur
de frequence.
W1
W2
D
H1
H2
Summary of Contents for ACS 580-OP
Page 2: ......
