20 EN - Quick installation and start-up guide
EN
ES
FI
FR
IT
PL
PT
RU
SV
TR
ZH
Reinstall covers (frames R3...R8)
Frames Action
R3, R4
1. Reinstall the cover: Put the tabs on the cover top in their counterparts on the
housing and press the cover.
2. Tighten the retaining screw at the bottom with a screwdriver.
R5
1. Slide the cover upwards (1a) and tighten the retaining screws (1b).
2. Reinstall the module cover (2a) and press the cover at bottom. Tighten the two
retaining screws (2b) with a screwdriver.
R6...R8 1. Install the side plates (1a) of the cable box. Tighten the retaining screws (1b) with
a screw driver.
2. Slide the cover (2a) of the cable box on the module from below until the cover
snaps into place.
3. Reinstall the module cover (3a). Tighten the two retaining screws (3b) with a
screwdriver.
1a
1b
1b
2b
2a
1b
1a
2a
3a
3b
ACQ80R0-R8 QIG.book Page 20 Friday, February 1, 2019 1:18 PM