Start up and use 27
EN
ES
PL
TR
ZH
Fault and warning messages
For more information on fault and warning messages, see the drive firmware manual.
Drive and panel communication failure
Status light
Fault messages
The display shows the active fault message when a problem is
detected.
When a fault message code is displayed:
1. Identify and eliminate the cause. See list of
page
2. Press Reset in the Fault view.
Warning messages
The display shows warning message codes when a problem is
detected.
To view the warning messages list:
1. Open the Main menu
.
2. Select Diagnostics
and open the Warning messages list.
See list of
The drive does not respond to the panel commands during
communication failure.
The drive and the panel are not compatible.
Continuous green
Indicates that drive is functioning normally.
Green, blinking
Indicates an active warning in the drive.
Red, continuous
Indicates an active fault in the drive.
Loc
46.0Hz
1001
Reset?
Loc
46.0Hz
Warning:2009
Warning:2020
Warning:2009
ACQ80R0-R8 QIG.book Page 27 Friday, February 1, 2019 1:18 PM