ABB ACH580-01 Series, Quick Installation And Start-Up Manual

Page: 317 / 412

EN – Quick start-up guide 317
R0-
R4
R1-
R9
EN
DA
DE
ES
FI
FR
IT
NL
PL
PT
RU
SV
TR
ZH
To change a value in an edit view:
• Use
and to move the cursor left and
right.
• Use and to change the value.
Press ( Save ) to accept the new setting, or
press ( Cancel ) to go back to the previous
view without making changes.
This step is optional, and requires rotating the
motor. Do not do this if it could cause any risk, or if
the mechanical set-up does not allow it.
To do the direction test, select
Spin the motor
and press ( Next ).
Press the Hand key on the panel to start the
drive.
Check the direction of the motor.
If it is forward, select
Yes, motor is spinning
forward and press ( Next ) to continue.
If the direction is not forward, select No, fix
direction and press ( Next ) to continue.
Select the localization you want to use and press
( Next ).
Hand