19
OEMO
Motorantrieb
Motor operator
The operator mounted on the auxiliary moun-
ting base
The bracket mounted motor operator; the
prefabricated unit made in the factory accor-
ding to customer specifications.
The motor operator mounted behind the switch
OETL 200...800 and OESA 200...400.In these
units the shaft comes through the switch
mechanism.
The rear mounted operators are also possible
for the modified switches OETL 1000...3150
and OESA 630...800; for rear mounting the
indication plate of the motor operator has to be
changed.
The indication plate has to be ordered separa-
tely; more specific information on application.
The motor operator may be wired according to
the connection diagram 3.
OFF
O
ON
I
Motorantrieb auf der Hilfsbefestigungsplatte
montiert
Motorantrieb auf Konsole montiert; vorgefer-
tigtes Teil, dass nach den Wünschen des
Kunden hergestellt wird.
Motorantrieb, der hinter den Schaltern OETL
200...800 und OESA 250...400 befestigt wird.
Bei dieser Ausführung geht die Welle durch
den Schaltmechanismus hindurch.
Bei den modifizierten Schaltern OETL 1000...
3150 und OESA 630...800 kann der Motoran-
trieb auch hinten angebracht werden; bei der
rückwärtigen Anbringung muss die Schalt-
stellungsanzeige des Motorantriebs geändert
werden.
Die Schaltstellungsanzeige muss extra bestellt
werden; weitere Informationen bei Bestellung.
Der Motorantrieb soll gemäss Schaltplan 3
angeschlossen werden.
Die Montierung ausführet wie
I-O Montierung.
Intallation, see chapter 6.