manualshive.com logo in svg

abaco systems CPCI-7806, Hardware Reference Manual, Page: 79 / 95

Share
Download
abaco systems CPCI-7806 Hardware Reference Manual Download Page 79

Publication No. 500-657806-000 Rev. G

System Driver Software 79

D.2  Microsoft Windows XP Professional Software Driver Installation

NOTE

Prior to installing device drivers, Windows XP should be updated to Service Pack 1a or later. 

Visit http://support.microsoft.com and search for the latest Service Pack information.

D.2.1 Video Driver Installation

1. If not already present, insert the Windows Drivers CD-ROM.

2. Click ‘Start,’ ‘Run,’ ‘Browse.’ In the ‘Look in’ pull-down selection menu, 

select the CD-ROM drive. Double-click on the ‘Video’ folder. Double-click on 
‘win2k_xp141.’ Click ‘OK.’

3. At the ‘Intel(R) Extreme Chipset Graphics Driver Software’ window, click 

‘Next.’

4. At the ‘Intel(R) Extreme Graphics 2’ window, click ‘Next.’

5. Click ‘Yes’ to agree to the software license agreement.

6. Ensure ‘Yes, I want to restart my computer now’ is selected and click ‘Finish.’ 

The computer will restart. The video resolution settings may be changed as 
desired.

NOTE

If only analog video is being used, ensure that ‘

Monitor

’ is selected as the default video device in the 

driver.

D.2.2 Hance Rapids Chipset Software Installation

1. If not already present, insert the Windows Drivers CD-ROM.

2. Click ‘Start,’ ‘Run,’ ‘Browse.’ In the ‘Look in’ pull-down selection menu, 

select the CD-ROM drive. Double-click on the ‘Hance Rapids’ folder. 
Double-click on the ‘Applications’ folder. Double-click on ‘infinst_enu.’ Click 
‘OK.’

3. At the ‘Intel Chipset Software Installation Utility’ window, click ‘Next.’ Click 

‘Yes’ to agree to the software license agreement. Click ‘Next.’ At each of the 
following ‘Hardware Installation’ windows, click ‘Continue Anyway.’

4. Ensure ‘Yes, I want to restart my computer now’ is selected and click ‘Finish.’ 

The computer will restart.

D.2.3 USB 2.0 EHCI Host Controller

Depending on how the operating system and the latest service pack were 
installed, the USB 2.0 controller driver may or may not be running. Visit

http://support.microsoft.com

 and search for

 Availability of USB 2.0 Support in 

Windows XP SP1

, for more information on this topic.

To determine whether the driver for the USB 2.0 controller is running, click ‘Start,’ 
right-click on ‘My Computer,’ and select ‘Manage.’ In the left pane of the 
‘Computer Management’ window, click on ‘Device Manager.’ In the right pane, 
click on the ‘+’ next to ‘Universal Serial Bus controllers’ to expand the group. If 
there is a ‘Standard Enhanced PCI to USB Host Controller’ listed in the group, the 
USB 2.0 EHCI Host Controller driver is already running, and no further 
configuration is necessary for the device.

Summary of Contents for CPCI-7806
































































































Reviews:

No comments