manualshive.com logo in svg

abaco systems CPCI-7806, Hardware Reference Manual, Page: 13 / 95

Share
Download
abaco systems CPCI-7806 Hardware Reference Manual Download Page 13

Publication No. 500-657806-000 Rev. G

13

Overview

Abaco Systems’ CPCI-7806

*

/CPCI-7806RC

*

 are full featured Pentium

®

 M or 

Celeron

®

 M based, single board computers (SBCs) in a single-slot, passively 

cooled, Eurocard form factor. These products utilize the advanced technology of 
the Intel

®

 855GME chipset. The CPCI-7806/CPCI-7806RC are compliant with the 

CompactPCI Specification Rev. 2.2 and features a universal PCI-to-PCI bridge, 
allowing the boards to function as a system controller or peripheral CPU in multi-
CPU systems.

Features

The CPCI-7806/CPCI-7806RC provide features typically found on desktop 
systems:

• Up to 1 Gbyte DDR SDRAM

• Built-in  SVGA  support (requires ACC-0584

*

/ACC-0584RC

*

)

• Built-in Dual Gigabit Ethernet (GbE)

• Ultra IDE drive support (requires ACC-0584/ACC-0584RC)

• Serial ATA (requires ACC-0584/ACC-0584RC)

• Floppy drive support (requires ACC-0584/ACC-0584RC)

• USB 2.0 (requires ACC-0584/ACC-0584RC)

• Two RS232 serial ports (COM1 via front panel, COM2 via ACC-0584/

ACC-0584RC)

• Real-Time  clock/calendar

• Front panel reset switch

• Miniature speaker

• Keyboard/Mouse port (requires ACC-0584/ACC-0584RC)

The 855GME chipset allows the CPCI-7806/CPCI-7806RC to provide enhanced 
features such as integrated video and Ultra ATA/100 IDE support. The CPCI-7806/
CPCI-7806RC are capable of executing many of today’s desktop operating 
systems such as Microsoft

®

’s Windows

®

 XP, Windows 2000 and a wide variety of 

Linux

®

 based operating systems. The standard desktop features of the CPCI-7806/

CPCI-7806RC are described in Chapter 2 

 

Standard Features, 

page 26

 of this 

manual.

The CPCI-7806/CPCI-7806RC provide features useful to embedded applications 
such as:

• PICMG

®

 2.16 support

• Universal CompactPCI support (system controller or peripheral)

• Remote Ethernet booting

• Up to 1 Gbyte of bootable CompactFlash (optional)

• Software-selectable Watchdog Timer with reset

Summary of Contents for CPCI-7806
































































































Reviews:

No comments