23
When the rod has been fully
inserted into the bracket, the
wheelchair is also lifted.
7.3 Fixing the s-max to the wheelchair
Pick up one of the securing
pins (Quick-Pin) and push in
the central release pin with
the thumb.
Insert the securing pin into
the hole of one of the upper
wheelchair brackets
» Release the release pin.
7.4 Removing the wheelchair wheels
Press in the release button
in the centre of the quick-
release axle and pull off the
wheel.
» Repeat on the other side.
Retract the climbing leg again
by pressing and holding the
UP/DOWN switch.
» The wheelchair and the
s-max are ready for use.
Release the UP/DOWN
switch when the wheelchair
wheels are approx.
1 cm
off
the ground.
Repeat process on the other
side.
i
