AAT s-max D1352 User Manual Download

Page: 36 / 44

9.3 Cleaning and disinfection

WARNING - No moisture must be allowed to enter the interior of the device!

This may result in electric shocks! Use only damp cloths for cleaning the device’s surface!

Never use wet cloths!

WARNING - Test all safety-relevant functions after cleaning!

WARNING - Do not smoke during cleaning!

NOTE - Keep the stair climber away from sources of ignition!

NOTE - Clean the safety brakes in the rims weekly or with spirit when dirty! Observe the

hazard information for the spirit!

NOTE - Do not use a high-pressure cleaner!

NOTE - Do not use abrasive or aggressive agents (if necessary, test on an inconspicuous

area first)!

NOTE - Do not use substances containing alcohol!

NOTE - Do not use acidic substances such as orange cleaner!

NOTE - Clean upholstered surfaces and all surfaces that come into direct contact with the skin

as necessary (e.g. optional headrest).

If you want to disinfect the

stair climber, carry out a wipe

disinfection.

Wipe the surfaces of the stair

climber with mild household

cleaning agents.

Observe the manufacturer’s

information.

Use household disinfectants.

Observe the manufacturer’s

information.

Possible disinfectants:

• Ecolab Oxy Wipe disinfectant wipes

• B15 disinfectant wipes orochemie

• Schülke mikrozid sensitive wipes

• Sagrotan disinfection cleaner

Summary of Contents for s-max D1352













































Search results

Summary of Contents for s-max D1352

Reviews:

Related manuals for s-max D1352

Brands by name

Popular brands

AAT s-max D1352, User Manual

Search results

Summary of Contents for s-max D1352

Reviews:

Related manuals for s-max D1352

Brands by name

Popular brands