background image

18

6.5  Checking the safety brakes

 DANGER - If there is only a one-sided braking eff ect or no braking eff ect, do not use the s-max 

aviation, to avoid falling from the stairs. Notify the manufacturer, the AAT fi eld service, or the 

authorised specialist dealer! 

 WARNING - Check safety brakes without occupant!

Tilting the s-max aviation

» Test the safety brakes 

before every journey.

Test: the s-max cannot be 

rolled forwards, but only 

backwards = safety brakes 

active.

i

Recommendation by 

the manufacturer:

as an aid, support foot 

on the drive housing to 

tilt the s-max backwards.

For a detailed procedure, 

refer to chapter 8.3.

Single-step mode  

Deactivate / Activate 

LED is lit = single-step mode 

activated!

If you do not need the 

single-step mode, you can 

switch  it  off   manually  on  the 

membrane keypad. 

» LED is not lit = single-step 

mode deactivated!

i

Manufacturer’s 

recommendation: 

Only deactivate the 

single-step mode, if the 

operator is able to handle 

the s-max aviation safely. 

 DANGER - With the single-step mode deactivated, it is essential to ensure correct operation, 

otherwise the s-max aviation may slip!

6.6  Single-step mode

Summary of Contents for s-max aviation D1611









































Reviews: