WARNING NOT SECURING ALL PARTS PROPERLY CAN CREATE A SERIOUS SAFETY HAZARD.
NOTE: A PHILLIPS SCREWDRIVER OR A CORDLESS HAND DRILL IS REQUIRED TO
TIGHTEN/SECURE ALL SCREWS.
IDENTIFY ALL COMPONENTS TO START ASSEMBLY
PARTS INCLUDED FOR WALKER
PARTIALLY ASSEMBLED FRAME.
4 CASTERS (2 WITH BRAKE & 2 NON BRAKE
SIDE OUTRIGGERS WITH ANTI--TIPS--2
SIDE RAILS--- 2 MAKE UP THE ARM SECTIONS
SPRING LOADED FLAT GATE---1 IS
CONNECTED TO ONE SIDE RAIL
PVC BACK --1
MESH SLING-- 1
SEAT CUSHION--1
SAFETY BELT-- 1
CLAMP LOCKS FOR ADJUSTABLE HEIGHTS
--
4 PLACED ON BOTTOM FRAME
REINFORCEMENT RINGS -- 4 ATTACHED TO
BOTTOM FRAME IN CORNERS
STEP 2
STEP 1
NOTE: A PHILLIPS SCREWDRIVER OR A CORDLESS HAND DRILL IS REQUIRED TO TIGHTEN/SECURE ALL SCREWS.
STEP 5
STEP 3
STEP 4
STEP 6
STEP 7-1
REV. B Date: 17-02-11 Page 1 of 2
MJM International Corporation 1-800-270-6199 Fax: (956) 781-5552
www.mjminternational.com [email protected]
MJM INTERNATIONAL CORPORATION
418-OR-3TW
REMOVE SCREWS FROM REINFORCEMENT
RINGS
INSERT CASTERS --PLACE BRAKE WHEELS
ON THE REAR OF THE
WALKER
SECURE CASTERS WITH SCREWS PROVIDED
USING
PILOT HOLE AS
REFERENCE
INSERT OUTRIGGERS ON THE SIDE OF THE
BOTTOM
FRAME BY MATCHING COLOR CODED
DOTS AND SECURE
USING
SCREWS PROVIDED
USING PILOT HOLES AS
REFERENCE
REMOVE SCREWS FROM AREA BY SEAT
SECTION
INSERT SIDE RAILS BY MATCHING COLOR CODED
DOTS.
