background image

12

4.8  Technical data

  

 WARNING - Do not exceed the total permissible weight and the max. person weight, as this 

may lead to defects or an overload the s-max! 

 NOTE - Observe the technical data.

i

Technology

s-max D1611

Own weight

Climbing unit = 33.6 kg 

Handle unit = 3.4 kg 

Battery pack = 3.1 kg 

Total weight without battery = 37 kg

Total permissible weight

200 kg

Maximum person weight

160 kg

Climbing speed in steps / min

8 - 23, continuously adjustable 

1)

Range per battery charge for an  

average person weight of 75 kg 

Approx. 18 floors (approx. 270 steps)

Range per battery charge for a max.  

person weight of 160 kg (person)

Approx. 9 floors (approx. 135 steps)

Maximum height of step

225 mm

Min. depth of step

140 mm 

2)

Required step width 

Width s-max aviation with transport chair + 100 mm

Minimum platform size 

1350 mm x 1350 mm

Min. outer radius from step depth 140 mm  

(spiral staircases)

1350 mm

Max. slope of the stairs

61.2°

Min. step depth in mm (spiral staircases)

140 mm

Batteries

2 x 12 V / 3.3 Ah (gas-tight)

Direct current motor

24 V / 275 W

Switching force UP/DOWN switch

3 - 8 N

Direct operating forces

3 - 8 N

Sound pressure level

< 70 dB

Storing/operating temperature: Device

-40 °C to +65 °C / -25 °C to +50 °C

Storing/operating temperature: Battery

-25 °C to +65 °C / -25 °C to +50 °C 

3)

Battery charging temperature

0 °C to + 40 °C

Altitude application range (sea level)

< 3000 m above sea level

Vibration information

The weighted RMS value of acceleration, to which the upper body 

is subjected, is typically below 2.5 m/s2.

Adhesive label with serial number

Battery pack drawer

IP protection class

IPX4

Classification according to ISO 7176-28:2012

Type C

1) With activated ComfortStep, the climbing speed and the range are reduced. The range also depends on the weight of the occupant.
2) Any steps of a smaller depth may not be travelled as in this case it is no longer possible for the wheel to be set down safely.
3) At temperatures below 0 °C the performance of the battery pack will decrease; therefore we recommend a storage temperature of at least 0 °C.

Summary of Contents for s-max aviation D1611









































Reviews: