Integrated Access Controller – Installation manual
All rights reserved. © AAT HOLDING S.A.
3
1. Introduction
KZ-1000-IP-U
KZ-1000-IP-M
The KZ-1000-IP controller has been designed for access control system and
to be mounted on a wall without any additional enclosure. 32 bit processor en-
sures fast and reliable data processing. This is one door controller. With addi-
tional reader (also with keypad) it can use for two way control. Recommended
supply power type AWZ-200 plus 7Ah battery.
It’s possibility to set one from four identification mode:
- Card only (default mode)
- PIN only
- Card or PIN
- Card + PIN
KZ-1000-IP can work in standalone (programming from keypad) or in net-
work mode. In network mode it can work on-line or off-line with supervisor KaDe
Premium Plus software on PC.
KZ-1000-IP include following components in one plastic cabinet:
controller module for 1 door
card reader - 125 kHz ISO UNIQUE - model KZ-1000-U-IP
or
card reader - 13,56 MHz MIFARE – model KZ-1000-M-IP
keypad for PIN with bell button
LED and Buzzer
anti-disassemble sensor
