Aastra WiFi412 User Manual Download Page 28

Page: 28 / 121

Incoming Calls

WiFi412

Press to answer the call.

Handsfree

Press the middle Soft key to answer the call in handsfree
speaking mode.

You are connected to the caller via the loudspeaker and

microphone.

Note:

Which key to press depends on the answering

method used. To change the answering method see

section

“

Change answering method

” on page 29

End the call

Press.

The duration time of the call is shown.

Note:

When a headset is connected to the phone, the

button on the headset can be used to end the call.

Reject the call

Press.

Decline

Press the preprogrammed Soft key.

The call information is stored in the Call list.

On another extension

You can answer a call to a phone in another room:

Call the ringing extension and press.

Busy tone.

Press

Note:

France: press

; Sweden: press

Summary of Contents for WiFi412

























































































































Search results

Summary of Contents for WiFi412

Reviews:

Related manuals for WiFi412

Brands by name

Popular brands

Aastra WiFi412, User Manual

Search results

Summary of Contents for WiFi412

Reviews:

Related manuals for WiFi412

Brands by name

Popular brands