Aastra WiFi412 User Manual Download Page 15

Page: 15 / 121

WiFi412

Description

No access

Access indication

The phone has found the system, but does not receive an IP

address from the system; calling is not allowed.

Voice Only

Availability indication

The phone cannot connect to the CPDM; messaging is not

available.

Messaging Only

Availability indication

The phone cannot connect to the gateway; voice calling is not

available.

Display icons

Call / Off-hook

Appears when your phone is off-hook and flashes during ringing.

Audio signal off

Shown when all alert signals, including ring signal, message tone,

key beep, etc. are turned off. High priority messages will however

override this setting. See section “

Audible Adjustments

” on

page 106.

Signal strength

Appears when your phone is in idle mode. The level indicators

decrease as the signal strength becomes weaker.

Battery

Always shown in the display in idle mode. When the level is low it is

time to charge the battery. See section “

Battery

” on page 111.

Loudspeaking (handsfree)

Press the soft key to activate the loudspeaker. (handsfree). See

section “

During Calls

” on page 54 (the used symbol is

Loudspeaking

Press the soft key to deactivate the loudspeaker.

New message

Appears when a new message is received. The number on the

right side of the icon shows the total number of unread messages.

The symbol remains until the message is marked as read. See

section “

Messages

” on page 68.

Action required

Added in front of messages when an action is required.

Summary of Contents for WiFi412

























































































































Search results

Summary of Contents for WiFi412

Reviews:

Related manuals for WiFi412

Brands by name

Popular brands

Aastra WiFi412, User Manual

Search results

Summary of Contents for WiFi412

Reviews:

Related manuals for WiFi412

Brands by name

Popular brands