Aastra WiFi412 User Manual Download Page 113

Page: 113 / 121

113

WiFi412

Installation

Charging rack

Important!

Only use the equipment designed for the WiFi412 phone, see below.

The charging rack is used for charging your phone and/or spare

batteries. When charging spare batteries an adapter is needed. The

wall mounted charging rack and its power supply are modular

systems which enables a number of installation configurations.

Each power supply can support three charging racks with four

positions for phones and/or batteries in each rack (see technical

specifications for the charging rack).
As the phone cannot distinguish between a desktop charger and

the charging rack, it is recommended that the alert signal is

silenced when placed in a rack, see section “

Audible Adjustments

”

on page 106. It can be set in the “In charger” profile, see section

“

Profiles

” on page 87.

Charging spare batteries

Place the battery in the charging slot of the charging rack. The LED

on the adapter turns orange. When the battery is fully charged, the

LED will turn green.
If an error occurs during charging, the LED will turn red.
If the LED does not start to flash when the battery is placed in the

charging slot, the battery is not in contact. Remove the battery and

put it into the charging slot again.

Note:

It is not possible to charge spare batteries in the

Desktop charger.

Product description

Identification on product

Power Supply for Rack charger, 85-286 V AC

BMLNB 101 54/1

022

Summary of Contents for WiFi412

























































































































Search results

Summary of Contents for WiFi412

Reviews:

Related manuals for WiFi412

Brands by name

Popular brands

Aastra WiFi412, User Manual

Search results

Summary of Contents for WiFi412

Reviews:

Related manuals for WiFi412

Brands by name

Popular brands