Aastra WiFi412 User Manual Download Page 72

Page: 72 / 121

Messages

WiFi412

To mark a message as read

Press (see display).

The phone returns to the message list.

Note:

If you reply

to or just open the message, it is also

marked as read.

To reply to an incoming text message

Press (see display).

Send

Enter the message text and press (see display).

Sending

is displayed as a confirmation of the transfer.

To delete a message

Delete

Press (see display).

Delete message?

is shown in the display.

Yes

Press to delete the message (see display).

To delete all messages from the list

Options

Press (see display).

Scroll up or down the Options list to mark Delete all.

Select

Mark the preprogrammed Soft key.

Delete all messages?

is shown in the display.

Yes

Press to delete the message (see display).

All messages deleted

is displayed, and after one second the

phone return to idle mode.

will take you back to the message list.

Room 1024 "bed"

>9001

2008-04-26 2:05pm

Rejected

2008-04-26 2:05pm

Delete

Summary of Contents for WiFi412

























































































































Search results

Summary of Contents for WiFi412

Reviews:

Related manuals for WiFi412

Brands by name

Popular brands

Aastra WiFi412, User Manual

Search results

Summary of Contents for WiFi412

Reviews:

Related manuals for WiFi412

Brands by name

Popular brands