background image

8

6

5

7

11

9

10

1

2
3

13

12

14

4

TD 92474EN

31 October 2013 / Ver. H

User Manual
Aastra DT69x DECT Telephones

4

Figure 1. Description of the Cordless Telephones DT690/DT692.

1

Multifunction button (DT690 only)
This button can be used as a short cut to functions; long or double press 
modes
Push button (DT692 only)
This button is used for sending alarms.

2

Volume up
To increase the speaker volume

3

Volume down
To decrease the speaker volume

4

Soft keys
The three Soft keys are located just beneath the display and the 
function of each Soft key is indicated by text in the display just above 
the keys. In idle mode, the middle and right Soft key can be used for 
specific functions defined by the user of the handset.

5

Off-hook key
This key is used for connecting calls. One short press in idle mode opens 
the call list.

6

Voice mail access
To listen to a voice mail

7

Key lock and Upper/Lower case
A press on the key and then the soft key "Lock" in idle mode locks the 
keypad. If the keypad is locked, a press on the key and then the soft key 
"Yes" in idle mode unlocks the keypad. It is also for switching between 
upper/lower case and digits.

Summary of Contents for DT69x





















































































Reviews: