TD 92474EN
31 October 2013 / Ver. H
User Manual
Aastra DT69x DECT Telephones
32
9
If needed, enter PIN code, see User manual for the Bluetooth headset. Press "OK".
The dialog Successful pairing appears if the pairing process was successful. The
Bluetooth headset will also be connected indicated by the
icon in front of the
headset.
7.1.2
Headset
In order to achieve optimal audio quality with the different headset types, it is
recommended to select the corresponding headset profile.
The default setting is microphone on a boom, that is, the audio is optimized for using a
headset with microphone on a boom. The headset profile can be changed in the menu by do
as follows:
1
Select "Headset".
2
Select "Mic on boom", "Mic on cable", or "Hearing protection". Additional headset
profiles
1
might be visible in the list.
3
Press "Select".
If the preconfigured headset profiles do not match the headset in use, or the audio
performance is bad, it is possible to configure an own headset profile. This is done in the
PDM, see
Configuration Manual, Aastra DT390/DT69x DECT Telephones, TD 92503EN
. If an
own profile is configured in the PDM, it will be selectable in the menu.
7.1.3
System
Change System
Select “Automatic” or a specific system. If the telephone is set to “Automatic” it selects a
system according to the priority list, see
Priority
on page 34.
Subscribe Handset in IP-DECT System using Easy Registration
A handset can subscribe to an IP-DECT system automatically if the following are fulfilled:
•
The IP-DECT system is configured for Easy Registration, see Installation and Operation
Manual, IP-DECT Base Station for Aastra.
•
The handset’s extension number and IPEI are registered in the IP-DECT system, see the
corresponding manual for the IP-DECT system.
•
The handset is not subscribed to any systems.
•
The handset software is version 3.5.6 or greater.
1
If needed, switch off the handset by pressing the On-hook key
2
Switch on the handset by pressing On-hook key.
3
Select language to be used or press "Cancel". If Cancel is pressed, the default
language (English) will be used.
4
The handset starts to search for IP-DECT systems and will subscribe to the system
when it is found.
1.Only visible if a headset profile has been configured in the PDM/Device Manager.