TD 92474EN
31 October 2013 / Ver. H
User Manual
Aastra DT69x DECT Telephones
48
NOTE: The "Play" soft key is not available for Enhanced beep and Custom sound. Instead,
send a message to the handset to listen to the sound.
4
Press "Back".
TIP: By default, the message volume follows the ring volume setting, but it is possible to set
another message volume in the handset (DT692 only). See the handset’s Configuration
Manual for more information.
Turn the Vibrator on/off
If the vibrator is activated, it will vibrate at incoming call and message.
1
Select “Vibrator alert”. Choose between “On”, “On if silent” (i.e. the vibrator is on
when the telephone is muted), or “Off”.
2
Select vibrating alert.
3
Press "Back".
Set the Key Sound
This means that every time a key is used, the telephone gives a small sound.
1
Select “Key sound”. Choose between “Silent, “Click”, or “Tone”.
2
Select key sound.
3
Press "Back".
It is possible to listen to the key sound by pressing the Soft key "Play".
7.9.2
Setting the Automatic Key Lock
The handset keypad can be locked automatically to minimize the risk of accidentally
pressing keys or buttons while the handset is not in use. The keypad is automatically locked
after a lock time parameter "Auto lock time" expires.
The automatic key lock can be configured by the administrator in the PDM. For additional
information, see the
Configuration Manual, Aastra DT390/DT69x DECT Telephones, TD
92503EN
. The user may also configure the automatic key lock as described in the following
sections.
Note:
A call can be answered or ended while the keypad is locked. Any one of five
predefined emergency numbers can also be called while the keypad is locked as long as this
feature has been configured in the PDM/Device Manager. For additional information, see the
Configuration Manual, Aastra DT390/DT69x DECT Telephones, TD 92503EN
.
Automatic key lock: One of the following options may be configured:
"On": the handset is automatically locked if it is not used before the specified lock time
elapses.
"On, except calls": the handset is automatically locked if it is not used for the specified lock
time. If the user is in call when the lock time elapses, the handset remains unlocked until the
user has completed the call.
"Off": the keypad is never automatically locked.
Auto lock time: specifies the time that elapses before the keypad is automatically locked.
The shortest time that may be specified before the key lock is applied is 5 seconds and the
longest time is 3 minutes.
