Aastra Dialog 5446 IP Premium, User Manual

Page: 21 / 87

Dialog 5446 Description
Switch from
speakerphone to
headset
Press .
Switch from
headset to
speakerphone
Press .
2.7 Headset
2.7.1 Using the Headset
Using a headset enables you to make and receive calls without using the
handset.
Make a call
Press and dial the desired number and. In headset
preset mode, you are not required to press the headset
key.
Receive a call
Press .
Switch from
headset to handset
Lift the handset.
Switch from
handset to headset
Press and replace the handset.
Clear a call Press the C key.
2.7.1.1 Call Handling Via the Line Buttons
By default, the phone is set to connect calls to the loudspeaker when you
answer incoming calls, or when you make calls by tapping a
Line button. This
default setting is known as the loudspeaker preset mode . When you dial a
number without lifting the handset, the call is also connected to the loudspeaker
by default.
When you use a headset, you can switch to the headset preset mode to have
calls connected to the headset. If the headset preset mode is activated and you
press , the call is connected to the loudspeaker.
Activating Headset
Preset Mode To activate the headset preset mode, press and hold
down
for 4 seconds. When you hear a ring signal,
and the headset icon appears in the display to the right,
the headset preset mode is activated.
15
8/1553-DBC 446 01 Uen B3 2008-09-10