3 Using UC Server Features
20
Objectworld Unified Communications Server
2
If the phone has stopped ringing by the time you dial the *78 code, the system
prompts you to enter your pickup ID.
3.4 Using the UC Server Conference Bridge
UC Server has the ability to support a limited-sized conference bridge application.
The number of participants is limited to the number of licenses available, however
additional conference expansion licenses can be purchased. Use your SIP phone
during the conference to access several options, such as muting or adding
participants.
To access the conference bridge
1
From an internal telephone, dial
7050
.
2
Enter the 4-digit
conference ID
.
3
Follow the prompts to access the conference bridge.
Conference option list
When you press * during a conference, the following options are available. The
available options depend on at which point during the conference you press *. Only
relevant options are available.
•
Press 1
to mute yourself. Response: “You are now muted.”
•
Press 2
to unmute yourself. Response: “You are now unmuted.”
•
Press 3
to disable entry and exit notifications. Response: “Entry and exit
notifications have been disabled.”
•
Press 4
to mute all other participants. Response: “All others have been muted.”
NOTE:
If the pickup ID that you enter is invalid, the system prompts
you with “That is not a valid pickup ID,” and asks you to enter a valid
pickup ID.
TIP:
You can also dial 7050 to access the conference bridge from the
dial by extension
or
dial by name
directory.
TIP:
To access the list of options, you can
press *
while the
conference is in progress.
NOTE:
When you press 4 to mute all participants, this does not apply
to new callers who join the conference. To mute new callers, press 4
again.