Aastra 7444ip User Manual Download

Page: 54 / 130

6/1553-DBC 444 01 Uen B4 2014-03-26

UTGOING

ALLS

Also, the system administrator can disable the intrusion tone in
the system

8.2.3.1

Ordering Intrusion On a Busy Extension

To intrude on an ongoing call, do the following:

Press

more...

Select

Intrusion

, and press

Select

8.2.4 Bypass

If you need to get through to an extension forwarded through follow-me
or any kind of diversion, you can bypass the diversion.

8.2.4.1

Bypassing a Diverted Extension

To request bypass for a diverted extension, do the following:

Lift the handset and wait for a dial tone.

Dial

*60* extension number #.

Wait for answer.

Note:

U.S. and Canada: Dial

*1* extension number #

8.3

Emergency Calls (SOS Calls)

This section describes how to make emergency calls in different modes.

The emergency call feature allows you to make emergency calls even
when the phone is not logged on to the exchange. The emergency call
feature is enabled by the network administrator.

Note:

If the emergency call feature is disabled, emergency calls are

not

possible when the phone is logged off the exchange.

8.3.1

The Phone Is Logged On

Dial the emergency number (SOS number) and wait an for answer.

Summary of Contents for 7444ip



































































































































Search results

Summary of Contents for 7444ip

Reviews:

Related manuals for 7444ip

Brands by name

Popular brands

Aastra 7444ip, User Manual

Search results

Summary of Contents for 7444ip

Reviews:

Related manuals for 7444ip

Brands by name

Popular brands