Private directory
35
Creating a record in the private directory
You can create a new record while consulting the directory.
1 - Press the interactive
Create
key.
-> The display prompts you to enter the name of the new record.
When the directory is already full, the display shows
"
PRIVATE DIRECTORY IS FULL
".
2 - Enter on the alphanumeric keypad the name of the desired
party (14 characters maximum).
See "Alphanumeric keypad", Page 10.
• In case of an error, press the interactive
Erase
key.
3 - Press the
OK
key to confirm the name.
-> The screen proposes to fill in the number associated with the
name.
4 - Enter the call number, with the dial-out prefix if it is an external
number (up to 23 digits without separator).
Note:
if a name or number is already stored in the directory, the
phone outputs warning beeps.
• If you want to store an access code (example: secret code or
inquiry code), you have to press
R
before entering the code.
Also press
R
to insert a separator in this code, if necessary.
• In case of an error, press the
or
keys to select the
character you want to replace (place the cursor under the
character), then enter the new character
You can also press the interactive
Erase
key.
5 - Press the
OK
key to confirm the number.
-> The display prompts you to choose the list in which the record
will be classified (by default, list 1 is suggested).
6 - You may also press an interactive key which corresponds to a
different list (for example list 4).
7 - Press the
OK
key to finish.
-> The display shows the stored name.
Reminder:
Use the red
key to cancel or terminate a
sequence.
Create
List 4