Description of the phone
10
Alphanumeric keypad
The alphanumeric keypad is used to enter letters and digits. The entry is based on the
equivalence of the keys with letters or signs.
To enter a text:
• Select the required character by successively pressing the
corresponding key.
Example:
• On pressing the key 2 once, the letter A is displayed,
• On pressing the key 2 a second time, the letter B is displayed,
• On pressing the key 2 a third time, the letter C is displayed,
• On pressing the key 2 a fourth time, the numeral 2 is displayed.
Key 1 is used to enter the following characters:
• When entering text: - /
space
: . " , < > = + ? ! % 1
• In call by name mode: - . : 1
Note: In this mode the 0 is used to enter:
space
and 0; the * key is
used to enter: ? ! # *.
All letters are entered in upper-case only.
When entering text:
• To enter another letter which is located on a different key:
-> Press immediately another key to enter the letter according
to the same principle.
• To enter another letter which is located on the same key:
-> Wait until the cursor flashes at the next position.
Nota: in call by name mode and on previous system
releases, press # before entering the following letter on the
same key.
When entering text, you can replace an entry:
1 - press the key
or
to select the character you want to
replace (place the cursor under the character).
2 - Enter the new character.
In call by name mode, use the keys reserved for the call by name
function (See "To call a party from a directory by name:" on page 18.)
To confirm an entry, press the OK key.