A&D HV-15KC, Instruction Manual

Page: 77 / 92

HV/HW-C/CP Series Page 75
Data repeated
When the control codes $SP, $CR and $LF can be used with " and a number (of two digits
maximum)", these codes will be repeated the number of times designated.
Example where $LF is repeated 9 times :
$LF 9
Example where space is repeated 12 times :
$SP 12
Link mark
&
If you will send more than 2 lines of data, attach
&
to the end of the first line. Then, the scale
decides that the data is continued.
As separators for data, a space (
20h
) or comma (
2Ch
)
,
are used.
These separators can be omitted, but you cannot omit the comma (
2Ch
)
,
after the
PF
command. You must start with the
PF,
command.
Data format for variable parameters (Space (
20h
) is expressed as .)
Variable parameters of the scale data are replaced with the following data format
:
Data is a fixed length that includes a sign and a decimal point.
The leading zeros of data are replaced with spaces (
20h
) .
$ID
of variable parameter
Example of ID number : ABC456
6 digits
A B C 4 5 6
$PC
of variable parameter
Example of counting number : 123 pcs
9 digit counting 3 digit unit
+ 1 2 3 P C
$WT
of variable parameter
Example of the current weighing value : 1.234 kg
9 digit weighing value + 3 digit unit
+ 1 . 2 3 4 k g
$TR
of variable parameters
Example of the current tare value : 1.234 kg
9 digit tare value + 3 digit unit
+ 1 . 2 3 4 k g
$PT
of variable parameter
Example of the current preset tare value : 1.234 kg
9 digit preset tare value + 3 digit unit
+ 1 . 2 3 4 k g
$TL
of variable parameter
Example of accumulation value : 1.234 kg
9 digit accumulation value + 3 digit unit
+ 1 . 2 3 4 k g