A&D HV-15KC, Instruction Manual

Page: 15 / 92

HV/HW-C/CP Series Page 13
5.2. Installing the Batteries for Type C
Step 1 Turn off the display.
Remove the AC adapter.
AC adapter
Please confirm that the AC adapter type is correct
for your local voltage and receptacle type. The AC
adapter may not be provided for some areas.
Step 2 Open the battery cover and inner cover in that order.
Push the battery cover and slide it.
Push the hook of the inner cover to the left and lift it.
Step 3 Insert four new batteries with proper polarity (
+
,
-
).
Batteries are type D, Mono, R20P , R20PU or LR20.
Step 4 Close the covers in the reverse of the order of step 2.
Caution
When batteries are consumed mostly, the battery mark is displayed.
Replace batteries with four new ones, when is displayed.
Do not mix used and new batteries. Do not use batteries of different type and manufacturer.
Doing so may cause damage to the batteries and the scale.
Check the battery direction. If the batteries are installed in the wrong direction, it may cause
battery leakage. If the direction of just one battery is wrong, the scale may work temporarily.
The battery life depends on the ambient temperature. It becomes shorter in low temperatures
such as in winter.
Remove the batteries from the display unit, when the scale is not to be used for a long time.
Leaving them installed may result in leakage and cause damage.
Damage due to battery leakage is not covered under warranty.
Step 2
Hook
Inner cover
Battery case
Battery cover
AC adapter
Step1
Batteries
Step
3
Battery cover
Step
4