A&D HV-15KC Instruction Manual Download Page 26

Page: 26 / 92

Page 24

HV/HW-C/CP Series

7. Basic Operation

7.1. Turning the Scale On/Off and Weighing

7.1.1. When Using the AC Adapter

Step 1 Ground the scale.

Step 2 Confirm that nothing is placed on the weighing pan.

Step 3 Confirm that local voltage and receptacle type are correct.

Step 4 The scale is turned on or off using the ON/OFF key.

Step 5 Check the accuracy of weighing. Allow a 30-minute warm up period before calibration.

Step 6 With nothing on the weighing pan, press the ZERO key to display the zero value.

Step 7 Gently place an article to be weighed on the weighing pan.

Step 8 Wait for the stability mark to be displayed. Read the weighing value.

Step 9 Gently remove the article from the weighing pan.

Step 10 Turn the scale off using the ON/OFF key.

Memo

When the scale is turned off using the ON/OFF key, the scale is in standby status. At this

time, minimum power consumption of the waiting mode and power consumption of the AC
adapter connected to the AC socket are consumed. If you want to shut off the power
consumption completely, disconnect the AC adapter.

AC adapter

Please confirm that the AC adapter type is correct
for your local voltage and receptacle type. The AC
adapter may not be provided for some areas.

Summary of Contents for HV-15KC





























































































Search results

Summary of Contents for HV-15KC

Reviews:

Related manuals for HV-15KC

Brands by name

Popular brands

A&D HV-15KC, Instruction Manual

Search results

Summary of Contents for HV-15KC

Reviews:

Related manuals for HV-15KC

Brands by name

Popular brands