![background image](http://html1.mh-extra.com/html/aandd/ad-4212d-301/ad-4212d-301_instruction-manual_446023022.webp)
20
6. UNDERHOOK
The underhook can be used for magnetic materials or density measurement. The built-in
underhook is revealed by removing the cap on the bottom of the balance. Use the underhook as
shown below.
Caution
Do not apply excessive force to the underhook.
When not in use, attach the cap to prevent dust from
getting into the balance.
Do not push the underhook upward
When turning the balance over, parts and weighing
matter in the weighing chamber will fall off. (Parts:
the weighing pan and fine range ring)
Remove them first.
When the cap is removed, a weighing error may
occur, because of drafts entering into the internal
portion of the balance. Arrange the room condition.
How to use
1 Remove the cap on the bottom of the balance.
2 Hang your weighing pan on the underhook.
Place the balance on the solid table.
Bottom
Underhook
Cap
Sturdy table equipped
with a hole.
Weighing pan