AAD Vigil Cuatro, User Manual

Page: 37 / 48

I. Unscrew Connectors
Locking Clip (CLC)
VII.
After CLC is well
positioned, secure with
original screw.
VI. Place Connectors Locking
Clip (CLC), and check if
CLC locks both connectors
V. Reconnect and manually
tighten the new spare unit
(Cutter or Control unit)
II. Remove Connectors
Locking Clip (CLC)
III. Manually unscrew
connector of spare unit
(for example cutter)
IV. Unplug connector
VIII. Check if CLC is closely
attached to Main Box (no
space between both objects)
It is mandatory to CORRECTLY place the Connectors Locking Clip (CLC) !!
If the CLC is missing, damaged, or if not correctly positioned, DO NOT JUMP with this Vigil
®
Cuatro !!
You can order a new Free CLC at your dealer, A.A.D. nv/sa Belgium or Vigil America.
3 3
English