AAD Vigil Cuatro, User Manual

Page: 26 / 48

2 2
VIGIL Cuatro
For example:
All of the parameter sequences are described in the Parameter Sequence Flow Chart. (see page 4 3 § 12.)
3.5.8. Choice confirmation
The green LED flashes five times and the message « Enjoy» is displayed for a few seconds to confirm the
Vigil
®
Cuatro is ready for use.
Action Display
1. Wait « CONFIG » displayed
2. Push Choose between « Feet » or « Meters »
3. Push
Choose between « U.S . » or « Metric »
(° F ahrenheit, mph , in ches of m ercury or ° C elsius, km/h , h ecto Pa scal)
4. Push
Choose between normal or reversed display « View » or
«View»
Remark:
While the message « Enjoy» is displayed, by pushing the button you can go back to the three menu's
( INFO , SETUP or CONFIG ) for a possible verification or modification.
If no altitude correction is entered, the chosen (« PRO », « STUDENT », « TANDEM » or « XTREME ») mode remains
displayed. If an altitude correction was entered, the chosen mode will be displayed as “ P ” (for PRO ), “ S ” (for STUDENT ),
” T ” (for TANDEM ) or “ X ” (for XTREME ) followed by a « + » or « - » sign preceding the value of the implemented altitude
correction (see example page 20 ). The value will be shown in feet ( ft ) or meters ( m ).
After switch on, the Vigil ® Cuatro stays on for a period of 14 hours, and will then switch off automatically
(see page 2 5 for more detail).
At the next switch-on, Vigil
®
Cuatro will remember and keep all of the previous settings used with the exception of
the ground zero reference. The ground zero reference is recalibrated at each switch on.
BEFORE EACH JUMP, check the unit carefully for any implemented mode or altitude correction (in ft. or m). 
