AAD Vigil Cuatro, User Manual

Page: 21 / 48

17
English
This first test procedure is followed by 3 different menus: « INFO », « SETUP », and « CONFIG » (see page 8 § 3).
Recommendation : If the Vigil
®
Cuatro is not yet configured to your standard measurement units, go first
to the “CONFIG” menu (see page 21 § 3.5.7.) to set the required units (U.S. or metric) before other settings.
These parameters are in clear language in function of the chosen units and as follows (*see page 21 § 3.5.7.):
•
•
Display Note: the number 8 is used for illustration (all segments used in a number)
Ver :8 8 .88 Software Ver sion
Lcd :8 8 .88 Controller version
#88888 Electronic Unit Serial Number
Production week and year
(for example 26/06 = week 26 in 2006)
TJ :8888 T otal J umps (Total number of jumps with this unit)
TFF :88 h
88 m 88 s
T otal F ree F all - Total free fall time with this unit in
h ours, followed by m inutes and s econds
LFF :188 s
888 km/h
L ast F ree F all - Duration displayed is s econds
and maximum speed of the last freefall displayed in km/h or mph
Saves 8 Number of activations on your Vigil ® Cuatro
T :+88° C or +88° F T emperature of Vigil
®
Cuatro main unit in °F or °C depending on the configuration
88 .88 inHg or 8888 hPa Atmospheric Pressure in inches of mercury (inHg) or hectopascal (hPa)
88/88

3.5. 4 . « INFO » Menu (Information)
This menu allows you to display your Vigil
®
Cuatro ’s reference parameters (version, date of manufacture and
serial number), data of previous jumps, as well as temperature and atmospheric pressure.
To enter the « INFO » menu, press the push button as soon as the display shows « INFO » and the red light flashes.