www.a-ts.cn A-TS Technology
FT50
74
Fan cover slot
Buckle
Fan plug and
socket
A-TS
Figure 8-2 Fan installation (2.2kW to 11kW)
2) Fan replacement, for models from 15kW to 160kW
a. Disassemble the fan
Unplug the power cord from the socket, use a screwdriver to remove the four fixing screws on
the fan cover, then remove the fan cover and the fan to complete the disassembly.
Fan plug and
socket
A-TS
Figure 8-3 Fan disassembly (15kW to 160kW)
b. Fan installation
Please follow the reverse steps of disassembly to install: insert the fan power cord plug into the
socket, and then put the fan cover and fan into the body installation part (please pay attention
to distinguish the positive direction of the fan). When putting it in, be sure to align the fan cover
with the four fixing holes at the bottom of the fan, and finally use a screwdriver to tighten the
fan fixing screws to complete the installation. After replacing the fan, make sure that the
correct direction of the fan is blowing upwards.
Fan plug and
socket
A-TS
