www.a-ts.cn A-TS Technology
FT50
61
(2) Motor parameter
Motor parameters are used to match the frequency converter with the
connected motor, and can also support open-loop and closed-loop control modes. Typical
examples of motor parameters are:
◆
Motor rating data from the motor nameplate
◆
Specifications of the connected encoder
××××
0.1...999.9A
P0403
.
M(0.0)
Parameter
name
Parameter
number
Factory
default
Value range
Parameter label
A-TS
Figure 6-3 Motor parameter label definition description
(3) Interconnection parameter
The interconnection parameters are used to determine the
input signal source of a function block. For each interconnection parameter, there is an input
signal with a certain format. There are following labels in the interconnection parameters.
◆
B is used in the connector parameters connected to the digital (on-off) connector
◆
W is used in the connector parameters connected to the single word (16-bit) connector
◆
DW is used in the connector parameters connected to the double word (32-bit)
connector
◆
D is used in the connector parameters connected to the single/double word (16/32-bit)
connector
P2501.B
Digital output 1
Parameter
name
Parameter
number
Connectable digital
（
on-off) connector
P1801.W
W××××
Main set frequency
Parameter
name
Parameter
number
Connector label type (W)
B
××××
A-TS
Figure 6-4 Interconnection parameter label definition description
(4) Read-only parameter
Read-only parameters are used to display internal values (such as
the output current of the frequency converter). These parameters can only be displayed and
cannot be changed. To distinguish it from other parameters, the parameter number is marked
with a lowercase letter r.
