54
Hot Key :
when user select this option, it will show another line
lines as Hot Key Power ON: Ctrl-F1”’ select any one you like.
After power off, if user key in the control-F, it will power up the
system.
Mouse Left, Mouse Right :
it will power up the system by double
click the left or right mouse. Note do not move your mouse between
the first click and the second click.
BUTTON ONLY :
only the power button can power the system.
KBC input clock
Let user change the keyboard working clock.
On Board
This item will enable or disable the floppy disk controller.
FDC Controller
On Board
User can select serial port IRQ. If set to Auto, system will assign
Serial Port 1
an IRQ for it. Note : set to Auto is not recommended.
On Board
User can select serial port IRQ. If set to Auto, system will
Serial Port 2
assign an IRQ for it. Note : set to Auto is not recommended.
UART Mode
This lets you select the Infrared mode. Choices are Standard,
Select
HPIR, and ASKIR. If you choose HPIR or ASKIR mode,
the screen will show another two lines to let you choose
‘IR Function Duplex’ (Full or Half) and‘RxD TxD Active’
(Hi Lo;
Lo Hi; Hi Hi;Lo Lo).
On Board
Let user select IRQ for parallel port, when Disabled, the parallel
Parallel Port
port will be disabled
On Board
Let user select error check mode. This item is not recommended to
Parallel Mode
change except user has special request.
ECP Mode
Select a DMA channel for the port.
Use DMA
Choices are 3, 1.
