27
CHAPTER 3 Award BIOS SETUP
Award BIOS manufacturer provides access to the system BIOS through the hardware
and software on each ATC-6510 mainboard. The hardware consists of a Flash ROM
and the software is a group of programs that are installed in the ROMBIOS along with
all the other data the BIOS must contain.
The ATC-6510 mainboard will require special driver supplied by the manufacturer to
update the BIOS SETUP program. It is a good idea to read the next page for details
for update BIOS driver installation or you can ask your system dealer to do it for you.
When the driver has been successfully updated, it is very important to contact your
system dealer to change the CMOS settings for your computer. The CMOS settings
are shown in the following pages.
NOTE :
To clear CMOS you should unplug the power cord, then set 2-3 to clear, put
it back to normal position and plug the power cord again.
JP8
Normal
1-2
Clear
2-3
Normal CMOS Clear CMOS
ISA slot
PCI slots
JP 8
