37
Boot Sequence
This category determines which drive is to search
first for the Disk Operating System (i.e., DOS).
A, C, SCSI
System will first search for floppy disk drive then
hard disk drive, and the next is SCSI device.
C, A, SCSI
System will first search for hard disk drive then
floppy disk drive, and the next is SCSI device.
C, CDROM, A
System will first search for hard disk drive then
CDROM drive, and the next is floppy disk drive.
CDROM, C, A
System will first search for CDROM drive then
hard disk drive, and the next is floppy disk drive.
D, A, SCSI
System will first search for secondary hard disk
drive then floppy disk drive, and the next is SCSI
device.
E, A, SCSI
System will first search for third hard disk drive
then floppy disk drive, and the next is SCSI device.
F, A, SCSI
System will first search for fourth hard disk drive
then floppy disk drive, and the next is SCSI device.
SCSI, A, C
System will first search for SCSI device then
floppy disk drive, and the next is hard disk drive.
SCSI, C, A
System will first search for SCSI device then hard
disk drive, and the next is floppy disk drive.
C only
System will search for hard disk drive only.
LS/ZIP, C
System will first search for LS120 or IOMEGA
(ZIP) drive, and the next is hard disk drive.
C is primary master; D is primary slave;
E is secondary master, F is secondary slave
Swap Floppy
This item allows you to determine whether to
Drive
enable the swap floppy drive or not.
The choice : Enabled/ Disabled
Boot Up Floppy
During POST, the BIOS will determine if the floppy
Seek
disk drive installed is 40 tracks (360K) or 80
tracks (720K, 1.2M, 1.44M)
Enabled
BIOS searches for floppy disk drive to
determine if it is 40 or 80 tracks
Disabled BIOS will not search for the type of
floppy disk drive by track number
