A-Trend ATC-6510, Manual

Page: 11 / 60

11
4. Then the following screen will appear.
ROM PCI/ISA BIOS (ATC-6510)
CHIPSET FEATURES SETUP
AWARD SOFTWARE, INC.
Auto Configuration : Enabled SDRAM CAS latency Time : 3
DRAM Speed Selection : 60 ns CPU Clock Ratio : 2.0x
MA Wait State : Slow Auto Detect DIMM/PCI ClK : Enabled
EDO RAS# To CAS# Delay : 3 CPU Clock Frequency : 66MHz
EDO RAS# Precharge Time : 3 Spread Spectrum Modulated : Disabled
EDO DRAM Read Burst : x333
*Following menus are optional*
EDO DRAM Write Burst : x222 *CPU Warning Temperature : Disabled
CPU-To-PCI IDE Posting : Disabled *Current System Temperature : 20
o
C/ 68
o
F
System BIOS Cacheable : Disabled *Current CPU Temperature : 20
o
C/ 68
o
F
Video BIOS Cacheable : Disabled *Current ChassisFAN Speed : 0 PRM
Video RAM Cacheable : Disabled *Current PWRFAN Speed : 0 PRM
8 Bit I/O Recovery Time : 3 *Current CPUFAN Speed : 0 RPM
16 Bit I/O Recovery Time : 2 *Vcore : 2.80V VTT(V) : 1.47V
Memory Hole At 15M-16M : Disabled *+3.3V : 3.45V +5V : 4.91V
Passive Release : Enabled *+12V : 12.22V –12V : -11.76
Delayed Transaction : Disabled *-5V : -5.16V
AGP Aperture Size (MB) : 128 Esc: Quit
#$%&
:Select Item
SDRAM RAS-to-CAS Delay : Slow F1 : Help PU/PD/+/-:Modify
SDRAM RAS Precharge Time : Slow F5 : Old Values (Shift)F2 :Color
F6 :Load BIOS Defaults
F7 :Load Setup Defaults
※※
NOTE
If an incorrect CPU frequency is set through the BIOS, a system failure may
occur. This system failure can be solved by pressing the “Insert” key on the
keyboard to clear up the previous set frequency (i.e. back to 133MHz (66MHz x 2.0)
or the default frequency), and then the power button to restart the system and reset
the value in BIOS screen. Or user can clear CMOS to reset the BIOS value.
Also the ATC-6510 mainboard supports keyboard power on or
mouse power on function, (refer to ‘Integrated Peripherals’, page48,49).
When you set ‘keyboard power on’, you can select set password or not.
When you set password, you should key-in the password to power on
the system. If you forget the password, you should clear CMOS to reset
the system.