53
IDE HDD Block
This allows your HD controller to use the fast block
Mode
mode to transfer data to and from your HD drive
Enabled
IDE controller uses block mode
Disabled IDE controller uses standard mode
IDE Primary
PIO - Programmed Input/Output, it allows the BIOS to
Master/Slave PIO
tell the controller what it wants and then let the controller
IDE Secondary
and the CPU to complete the task by themselves.
Master/Slave PIO
This is simpler and more faster. Your system supports
five modes, 0 - 4, which primarily differ in timing. When
Auto
is selected, the BIOS will select the best available mode.
IDE Primary
Auto, will support the Ultra DMA function.
Master/Slave UDMA
Disabled, will not support the Ultra DMA function.
IDE Secondary
Master/Slave UDMA
On-Chip Primary
This setup item allows you to either enable or disable the
PCI IDE
primary/secondary controller. You might choose to disable
On-Chip Second-
the controller if you were to add higher performance
ary PCI IDE
or specialized controller.
Onboard Audio
When enabled, the system will automatically detect sound card,
Chip
if your system has a sound card on the mainboard.
When disabled, the system will not detect the sound card.
USB Keyboard
Enabled will support USB keyboard in Win95 2.1 and NT 5.0 or
Support
above operating system.
Init AGP
This item will activate the AGP in the multi-display environment
Display First
, it displayed, if disabled, and the system has both AGP and PCI
VGA card, the AGP monitor will not display.
Power On
KB Power On Password:
this function is available for ATX power
Function
only. User can select the power on method to power on the system.
The options are the following :Password : when user select this
option, it will show “Enter Password:”, after user type password, it
will show “ Confirm Password:”, user should type the same
password to confirm it. After power off, if user types the correct
password, the system will power on.
