34
3. Changing the Display Units
The display interface to the heater has the option of selecting between
degrees Fahrenheit and degrees Celsius for temperature displays.
This can be found in the “Display Settings” menu. Also in this menu,
you may adjust how the backlight operates and the contrast of the
LCD screen.
actIon:
From the Main Menu, press the Down button to highlight "Display
Settings" then press Select.
dIsplaY:
actIon:
Use the UP and DOWN buttons to highlight the desired setting. Then
press Change. Again, use the UP and DOWN buttons to scroll through
the options for that setting.
dIsplaY:
actIon:
Press
update
to accept the change or
cancel
to reject it.
dIsplaY:
4. Fault and Warning Conditions
This water heater is equipped with electronic controls that have the
ability to monitor almost all aspects of the water heater operation. In
the case that there is an undesirable or unsafe condition that occurs,
the water heater controls will detect this condition and determine the
appropriate action. Part of this is displaying the information on the LCD
in plain text that accurately describes the condition and diagnostics
information that can be used to correct the issue.
There are two types of conditions that can occur during operation. These
are Warnings and Faults:
•
warnings:
This is a non-safety related condition that the control has
detected that may cause the water heater to operate in a less than optimal
condition, but does not pose a safety concern.
note:
When these conditions occur, continued heating cycles will
continue and the heater will attempt to regulate the water in the tank to
the
Operating Set Point
.
example of a warning:
• Faults: This
is a safety related condition that has been detected
by the heater.
NOTE: When these conditions occur, the water heater will not
continue any further heating cycles and the water will no longer be
heated until the condition is corrected and, in most cases, power has
been cycled.
example of a fault:
advanced diagnostics Information
When a fault or warning has been declared, advanced information can be
found in the control. By pressing the Advanced button, detailed information
can be found regarding diagnosing and resolving the problem.
warnInG: usage of the advanced information requires ability
equivalent to that of a licensed tradesmen in the field involved.
5. Access to the Current Fault or Warning
When a fault or warning has been detected by the control, it will
automatically be displayed on the screen and the back light will blink. If
you choose to leave the current fault or warning by pressing the Back key,
you can always return to the fault screen through the menu.
Summary of Contents for Residential Gas Water Heaters
Page 3: ...3 GENERAL SAFETY...
Page 4: ...4 GENERAL SAFETY...
Page 45: ...3 S CURIT G N RALE...
Page 46: ...4 S CURIT G N RALE...
