58
11.2.2
Selection of the data to be printed
After interfacing the printer with the
Saver One P
defibrillator, the operator must select the data and start printing.
Printing of the data will only be possible if a memory card has been installed in the defibrillator and it contains the
data of one or more rescues. To be able to select the various rescues to be printed, the operator must follow the
procedure below:
1
Enter the
Saver One P
menu and select the PRINT item
2
Make sure the
Saver One P
defibrillator has correctly detected the printer
If the
Saver One P
does not detect the printer, the message "No connection" will be displayed
In the print menu select the ARCHIVE item and select the rescue data to print
Each individual file with the .AED extension corresponds to the data recording of one individual rescue. The file can be
identified by the information shown directly below its name (rescue date and start time)
For more information on the print menu see the relevant paragraph
Summary of Contents for Saver One P
