29
5.6
M
EMORY
C
ARD
The
Saver One P
can record data on the external
memory card
as well as on the
internal memory
.
Supported memory cards are
SD/SDHC
cards with capacities up to 8GB
To install a Memory Card in the
Saver One P
follow this procedure:
A.
The Memory Card must be inserted before attaching the battery
B.
Place the device on a firm, stable horizontal surface as shown in the figure
C.
Insert the Memory Card with the contacts facing upwards as shown in the figure and push it until it is
completely inserted
The data recorded directly on the internal memory of the Saver ONE P can be downloaded via the
USB port
on the
back of the device (
figure 21
).
The USB cable to be used must be a
mini USB 2.0
(USB/Mini USB connection)
To connect the mini USB cables to the
Saver One P
follow this procedure:
A.
Detach the battery and insert the Mini USB terminal of the cable in the appropriate compartment on the
Saver ONE
B.
Connect the USB terminal of the cable to a Personal Computer
C.
Use the PC Saver View Express software
!!ATTENTION!!
The USB is a service port used for device configuration purposes (for the exclusive use of personnel authorized by
AMI) or for downloading recorded data stored internally.
The functions related to the USB port are enabled and accessible only when the device is turned off.
Figure 21
Figure 22
Figure 20
Summary of Contents for Saver One P
