2.4 Hardware Connection – Internet
This section describes how to connect the Ethernet Powerline Adaptor into your existing ADSL
broadband connection via ADSL Ethernet port. Follow the procedures describe below to connect the Ethernet
Powerline Adaptor to your ADSL broadband connection:
1.
Power off your PC or Notebook.
2.
Connect the provided Ethernet (RJ-45) cable to the Ethernet Powerline Adaptor’s Ethernet port.
3.
Connect the other end of the Ethernet (RJ-45) cable to an available Ethernet port of your ADSL
broadband Router.
4.
Plug the Ethernet Powerline Adaptor into a wall socket next to the computer.
5.
Turn on your computer.
6.
Check and confirm that the
Power, Powerline
and
Ethernet
LEDs on the Ethernet Powerline
Adaptor are
ON
.
The hardware connection mechanism is shown below:
Remark
: Do not connect the Powerline adaptor to a extention lead, power strip,extension cord,
surge protector as this may degrade the network performance.
Ethernet Powerline Adaptor
8
Summary of Contents for PA200AV
Page 15: ...Ethernet Powerline Adaptor 11 ...
